Struct PageFaultErrorCode

pub struct PageFaultErrorCode(/* private fields */);

Describes an page fault error code.

This structure is defined by the following manual sections:

• AMD Volume 2: 8.4.2
• Intel Volume 3A: 4.7

Implementations

impl PageFaultErrorCode

pub const PROTECTION_VIOLATION: Self = _

If this flag is set, the page fault was caused by a page-protection violation, else the page fault was caused by a not-present page.

pub const CAUSED_BY_WRITE: Self = _

If this flag is set, the memory access that caused the page fault was a write. Else the access that caused the page fault is a memory read. This bit does not necessarily indicate the cause of the page fault was a read or write violation.

pub const USER_MODE: Self = _

If this flag is set, an access in user mode (CPL=3) caused the page fault. Else an access in supervisor mode (CPL=0, 1, or 2) caused the page fault. This bit does not necessarily indicate the cause of the page fault was a privilege violation.

pub const MALFORMED_TABLE: Self = _

If this flag is set, the page fault is a result of the processor reading a 1 from a reserved field within a page-translation-table entry.

pub const INSTRUCTION_FETCH: Self = _

If this flag is set, it indicates that the access that caused the page fault was an instruction fetch.

pub const PROTECTION_KEY: Self = _

If this flag is set, it indicates that the page fault was caused by a protection key.

pub const SHADOW_STACK: Self = _

If this flag is set, it indicates that the page fault was caused by a shadow stack access.

pub const SGX: Self = _

If this flag is set, it indicates that the page fault was caused by SGX access-control requirements (Intel-only).

pub const RMP: Self = _

If this flag is set, it indicates that the page fault is a result of the processor encountering an RMP violation (AMD-only).

impl PageFaultErrorCode

pub const fn empty() -> Self

Get a flags value with all bits unset.

pub const fn all() -> Self

Get a flags value with all known bits set.

pub const fn bits(&self) -> u64

Get the underlying bits value.

The returned value is exactly the bits set in this flags value.

pub const fn from_bits(bits: u64) -> Option<Self>

Convert from a bits value.

This method will return None if any unknown bits are set.

pub const fn from_bits_truncate(bits: u64) -> Self

Convert from a bits value, unsetting any unknown bits.

pub const fn from_bits_retain(bits: u64) -> Self

Convert from a bits value exactly.

pub fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

This method will return None if name is empty or doesn’t correspond to any named flag.

pub const fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

pub const fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

pub const fn intersects(&self, other: Self) -> bool

Whether any set bits in a source flags value are also set in a target flags value.

pub const fn contains(&self, other: Self) -> bool

Whether all set bits in a source flags value are also set in a target flags value.

pub fn insert(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

pub fn remove(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. remove won’t truncate other, but the ! operator will.

pub fn toggle(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

pub fn set(&mut self, other: Self, value: bool)

Call insert when value is true or remove when value is false.

pub const fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

pub const fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

pub const fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

pub const fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

pub const fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl PageFaultErrorCode

pub const fn iter(&self) -> Iter<PageFaultErrorCode>

Yield a set of contained flags values.

Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.

pub const fn iter_names(&self) -> IterNames<PageFaultErrorCode>

Yield a set of contained named flags values.

This method is like iter, except only yields bits in contained named flags. Any unknown bits, or bits not corresponding to a contained flag will not be yielded.

Trait Implementations

impl Binary for PageFaultErrorCode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for PageFaultErrorCode

fn bitand(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

type Output = PageFaultErrorCode

The resulting type after applying the & operator.

impl BitAndAssign for PageFaultErrorCode

fn bitand_assign(&mut self, other: Self)

The bitwise and (&) of the bits in two flags values.

impl BitOr for PageFaultErrorCode

fn bitor(self, other: PageFaultErrorCode) -> Self

The bitwise or (|) of the bits in two flags values.

type Output = PageFaultErrorCode

The resulting type after applying the | operator.

impl BitOrAssign for PageFaultErrorCode

fn bitor_assign(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

impl BitXor for PageFaultErrorCode

fn bitxor(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

type Output = PageFaultErrorCode

The resulting type after applying the ^ operator.

impl BitXorAssign for PageFaultErrorCode

fn bitxor_assign(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

impl Clone for PageFaultErrorCode

fn clone(&self) -> PageFaultErrorCode

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for PageFaultErrorCode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Extend<PageFaultErrorCode> for PageFaultErrorCode

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

The bitwise or (|) of the bits in each flags value.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl Flags for PageFaultErrorCode

const FLAGS: &'static [Flag<PageFaultErrorCode>] = _

The set of defined flags.

type Bits = u64

The underlying bits type.

fn bits(&self) -> u64

Get the underlying bits value.

fn from_bits_retain(bits: u64) -> PageFaultErrorCode

Convert from a bits value exactly.

fn empty() -> Self

Get a flags value with all bits unset.

fn all() -> Self

Get a flags value with all known bits set.

fn from_bits(bits: Self::Bits) -> Option<Self>

Convert from a bits value.

fn from_bits_truncate(bits: Self::Bits) -> Self

Convert from a bits value, unsetting any unknown bits.

fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

fn iter(&self) -> Iter<Self>

Yield a set of contained flags values.

fn iter_names(&self) -> IterNames<Self>

Yield a set of contained named flags values.

fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

fn intersects(&self, other: Self) -> bool

where Self: Sized,

Whether any set bits in a source flags value are also set in a target flags value.

fn contains(&self, other: Self) -> bool

where Self: Sized,

Whether all set bits in a source flags value are also set in a target flags value.

fn insert(&mut self, other: Self)

where Self: Sized,

The bitwise or (|) of the bits in two flags values.

fn remove(&mut self, other: Self)

where Self: Sized,

The intersection of a source flags value with the complement of a target flags value (&!).

fn toggle(&mut self, other: Self)

where Self: Sized,

The bitwise exclusive-or (^) of the bits in two flags values.

fn set(&mut self, other: Self, value: bool)

where Self: Sized,

Call Flags::insert when value is true or Flags::remove when value is false.

fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl FromIterator<PageFaultErrorCode> for PageFaultErrorCode

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

The bitwise or (|) of the bits in each flags value.

impl Hash for PageFaultErrorCode

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl IntoIterator for PageFaultErrorCode

type Item = PageFaultErrorCode

The type of the elements being iterated over.

type IntoIter = Iter<PageFaultErrorCode>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl LowerHex for PageFaultErrorCode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for PageFaultErrorCode

fn not(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

type Output = PageFaultErrorCode

The resulting type after applying the ! operator.

impl Octal for PageFaultErrorCode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for PageFaultErrorCode

fn cmp(&self, other: &PageFaultErrorCode) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for PageFaultErrorCode

fn eq(&self, other: &PageFaultErrorCode) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for PageFaultErrorCode

fn partial_cmp(&self, other: &PageFaultErrorCode) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PublicFlags for PageFaultErrorCode

type Primitive = u64

The type of the underlying storage.

type Internal = InternalBitFlags

The type of the internal field on the generated flags type.

impl Sub for PageFaultErrorCode

fn sub(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

type Output = PageFaultErrorCode

The resulting type after applying the - operator.

impl SubAssign for PageFaultErrorCode

fn sub_assign(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

impl UpperHex for PageFaultErrorCode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for PageFaultErrorCode

impl Eq for PageFaultErrorCode

impl StructuralPartialEq for PageFaultErrorCode