Struct F

pub struct F(/* private fields */);

Network Device Feature Bits

Implementations

impl F

pub const CSUM: Self

Device handles packets with partial checksum. This “checksum offload” is a common feature on modern network cards.

pub const GUEST_CSUM: Self

Driver handles packets with partial checksum.

pub const CTRL_GUEST_OFFLOADS: Self

Control channel offloads reconfiguration support.

pub const MTU: Self

Device maximum MTU reporting is supported. If offered by the device, device advises driver about the value of its maximum MTU. If negotiated, the driver uses mtu as the maximum MTU value.

pub const MAC: Self

Device has given MAC address.

pub const GUEST_TSO4: Self

Driver can receive TSOv4.

pub const GUEST_TSO6: Self

Driver can receive TSOv6.

pub const GUEST_ECN: Self

Driver can receive TSO with ECN.

pub const GUEST_UFO: Self

Driver can receive UFO.

pub const HOST_TSO4: Self

Device can receive TSOv4.

pub const HOST_TSO6: Self

Device can receive TSOv6.

pub const HOST_ECN: Self

Device can receive TSO with ECN.

pub const HOST_UFO: Self

Device can receive UFO.

pub const MRG_RXBUF: Self

Driver can merge receive buffers.

pub const STATUS: Self

Configuration status field is available.

pub const CTRL_VQ: Self

Control channel is available.

pub const CTRL_RX: Self

Control channel RX mode support.

pub const CTRL_VLAN: Self

Control channel VLAN filtering.

pub const GUEST_ANNOUNCE: Self

Driver can send gratuitous packets.

pub const MQ: Self

Device supports multiqueue with automatic receive steering.

pub const CTRL_MAC_ADDR: Self

Set MAC address through control channel.

pub const HOST_USO: Self

Device can receive USO packets. Unlike UFO (fragmenting the packet) the USO splits large UDP packet to several segments when each of these smaller packets has UDP header.

pub const HASH_REPORT: Self

Device can report per-packet hash value and a type of calculated hash.

pub const GUEST_HDRLEN: Self

Driver can provide the exact hdr_len value. Device benefits from knowing the exact header length.

pub const RSS: Self

Device supports RSS (receive-side scaling) with Toeplitz hash calculation and configurable hash parameters for receive steering.

pub const RSC_EXT: Self

Device can process duplicated ACKs and report number of coalesced segments and duplicated ACKs.

pub const STANDBY: Self

Device may act as a standby for a primary device with the same MAC address.

pub const SPEED_DUPLEX: Self

Device reports speed and duplex.

pub const INDIRECT_DESC: Self

Device-independent Bit. See virtio::F::INDIRECT_DESC.

pub const EVENT_IDX: Self

Device-independent Bit. See virtio::F::EVENT_IDX.

pub const VERSION_1: Self

Device-independent Bit. See virtio::F::VERSION_1.

pub const ACCESS_PLATFORM: Self

Device-independent Bit. See virtio::F::ACCESS_PLATFORM.

pub const RING_PACKED: Self

Device-independent Bit. See virtio::F::RING_PACKED.

pub const IN_ORDER: Self

Device-independent Bit. See virtio::F::IN_ORDER.

pub const ORDER_PLATFORM: Self

Device-independent Bit. See virtio::F::ORDER_PLATFORM.

pub const SR_IOV: Self

Device-independent Bit. See virtio::F::SR_IOV.

pub const NOTIFICATION_DATA: Self

Device-independent Bit. See virtio::F::NOTIFICATION_DATA.

pub const NOTIF_CONFIG_DATA: Self

Device-independent Bit. See virtio::F::NOTIF_CONFIG_DATA.

pub const RING_RESET: Self

Device-independent Bit. See virtio::F::RING_RESET.

impl F

pub const fn empty() -> Self

Get a flags value with all bits unset.

pub const fn all() -> Self

Get a flags value with all known bits set.

pub const fn bits(&self) -> le128

Get the underlying bits value.

The returned value is exactly the bits set in this flags value.

pub const fn from_bits(bits: le128) -> Option<Self>

Convert from a bits value.

This method will return None if any unknown bits are set.

pub const fn from_bits_truncate(bits: le128) -> Self

Convert from a bits value, unsetting any unknown bits.

pub const fn from_bits_retain(bits: le128) -> Self

Convert from a bits value exactly.

pub fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

This method will return None if name is empty or doesn’t correspond to any named flag.

pub const fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

pub const fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

pub const fn intersects(&self, other: Self) -> bool

Whether any set bits in a source flags value are also set in a target flags value.

pub const fn contains(&self, other: Self) -> bool

Whether all set bits in a source flags value are also set in a target flags value.

pub fn insert(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

pub fn remove(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. remove won’t truncate other, but the ! operator will.

pub fn toggle(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

pub fn set(&mut self, other: Self, value: bool)

Call insert when value is true or remove when value is false.

pub const fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

pub const fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

pub const fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

pub const fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

pub const fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl F

pub fn iter(&self) -> Iter<Self>

Yield a set of contained flags values.

Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.

pub fn iter_names(&self) -> IterNames<Self>

Yield a set of contained named flags values.

This method is like iter, except only yields bits in contained named flags. Any unknown bits, or bits not corresponding to a contained flag will not be yielded.

Trait Implementations

impl AsMut<F> for F

fn as_mut(&mut self) -> &mut F

Converts this type into a mutable reference of the (usually inferred) input type.

impl AsMut<F> for F

fn as_mut(&mut self) -> &mut F

Returns a mutable reference to the device-independent features while retaining device-specific feature bits.

impl AsRef<F> for F

fn as_ref(&self) -> &F

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<F> for F

fn as_ref(&self) -> &F

Returns a shared reference to the device-independent features while retaining device-specific feature bits.

impl Binary for F

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for F

fn bitand(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

type Output = F

The resulting type after applying the & operator.

impl BitAndAssign for F

fn bitand_assign(&mut self, other: Self)

The bitwise and (&) of the bits in two flags values.

impl BitOr for F

fn bitor(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

type Output = F

The resulting type after applying the | operator.

impl BitOrAssign for F

fn bitor_assign(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

impl BitXor for F

fn bitxor(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

type Output = F

The resulting type after applying the ^ operator.

impl BitXorAssign for F

fn bitxor_assign(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

impl Clone for F

fn clone(&self) -> F

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for F

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for F

fn default() -> F

Returns the “default value” for a type.

impl Extend<F> for F

fn extend<T>(&mut self, iterator: T)

where T: IntoIterator<Item = Self>,

The bitwise or (|) of the bits in each flags value.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl FeatureBits for F

fn requirements(&self) -> Self

Returns the feature that this feature requires.

fn requirements_satisfied(&self) -> bool

Returns true if all internal feature requirements are satisfied.

impl Flags for F

const FLAGS: &'static [Flag<Self>]

The set of defined flags.

type Bits = Le<u128>

The underlying bits type.

fn from_bits_retain(bits: Self::Bits) -> Self

Convert from a bits value exactly.

fn bits(&self) -> Self::Bits

Get the underlying bits value.

fn empty() -> Self

Get a flags value with all bits unset.

fn all() -> Self

Get a flags value with all known bits set.

fn contains_unknown_bits(&self) -> bool

This method will return true if any unknown bits are set.

fn from_bits(bits: Self::Bits) -> Option<Self>

Convert from a bits value.

fn from_bits_truncate(bits: Self::Bits) -> Self

Convert from a bits value, unsetting any unknown bits.

fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

fn iter(&self) -> Iter<Self>

Yield a set of contained flags values.

fn iter_names(&self) -> IterNames<Self>

Yield a set of contained named flags values.

fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

fn intersects(&self, other: Self) -> bool

where Self: Sized,

Whether any set bits in a source flags value are also set in a target flags value.

fn contains(&self, other: Self) -> bool

where Self: Sized,

Whether all set bits in a source flags value are also set in a target flags value.

fn truncate(&mut self)

where Self: Sized,

Remove any unknown bits from the flags.

fn insert(&mut self, other: Self)

where Self: Sized,

The bitwise or (|) of the bits in two flags values.

fn remove(&mut self, other: Self)

where Self: Sized,

The intersection of a source flags value with the complement of a target flags value (&!).

fn toggle(&mut self, other: Self)

where Self: Sized,

The bitwise exclusive-or (^) of the bits in two flags values.

fn set(&mut self, other: Self, value: bool)

where Self: Sized,

Call Flags::insert when value is true or Flags::remove when value is false.

fn clear(&mut self)

where Self: Sized,

Unsets all bits in the flags.

fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl From<F> for F

fn from(value: F) -> Self

Converts to this type from the input type.

impl From<F> for F

fn from(value: F) -> Self

Returns the device-independent feature bits while retaining device-specific feature bits.

impl FromBytes for F

where le128: FromBytes,

fn ref_from_bytes( source: &[u8], ) -> Result<&Self, ConvertError<AlignmentError<&[u8], Self>, SizeError<&[u8], Self>, Infallible>>

where Self: KnownLayout + Immutable,

Interprets the given source as a &Self.

fn ref_from_prefix( source: &[u8], ) -> Result<(&Self, &[u8]), ConvertError<AlignmentError<&[u8], Self>, SizeError<&[u8], Self>, Infallible>>

where Self: KnownLayout + Immutable,

Interprets the prefix of the given source as a &Self without copying.

fn ref_from_suffix( source: &[u8], ) -> Result<(&[u8], &Self), ConvertError<AlignmentError<&[u8], Self>, SizeError<&[u8], Self>, Infallible>>

where Self: Immutable + KnownLayout,

Interprets the suffix of the given bytes as a &Self.

fn mut_from_bytes( source: &mut [u8], ) -> Result<&mut Self, ConvertError<AlignmentError<&mut [u8], Self>, SizeError<&mut [u8], Self>, Infallible>>

where Self: IntoBytes + KnownLayout,

Interprets the given source as a &mut Self.

fn mut_from_prefix( source: &mut [u8], ) -> Result<(&mut Self, &mut [u8]), ConvertError<AlignmentError<&mut [u8], Self>, SizeError<&mut [u8], Self>, Infallible>>

where Self: IntoBytes + KnownLayout,

Interprets the prefix of the given source as a &mut Self without copying.

fn mut_from_suffix( source: &mut [u8], ) -> Result<(&mut [u8], &mut Self), ConvertError<AlignmentError<&mut [u8], Self>, SizeError<&mut [u8], Self>, Infallible>>

where Self: IntoBytes + KnownLayout,

Interprets the suffix of the given source as a &mut Self without copying.

fn read_from_bytes(source: &[u8]) -> Result<Self, SizeError<&[u8], Self>>

where Self: Sized,

Reads a copy of Self from the given source.

fn read_from_prefix( source: &[u8], ) -> Result<(Self, &[u8]), SizeError<&[u8], Self>>

where Self: Sized,

Reads a copy of Self from the prefix of the given source.

fn read_from_suffix( source: &[u8], ) -> Result<(&[u8], Self), SizeError<&[u8], Self>>

where Self: Sized,

Reads a copy of Self from the suffix of the given source.

impl FromIterator<F> for F

fn from_iter<T>(iterator: T) -> Self

where T: IntoIterator<Item = Self>,

The bitwise or (|) of the bits in each flags value.

impl FromZeros for F

where le128: FromZeros,

fn zero(&mut self)

Overwrites self with zeros.

fn new_zeroed() -> Self

where Self: Sized,

Creates an instance of Self from zeroed bytes.

impl Hash for F

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl IntoBytes for F

where le128: IntoBytes,

fn as_bytes(&self) -> &[u8]

where Self: Immutable,

Gets the bytes of this value.

fn as_mut_bytes(&mut self) -> &mut [u8]

where Self: FromBytes,

Gets the bytes of this value mutably.

fn write_to(&self, dst: &mut [u8]) -> Result<(), SizeError<&Self, &mut [u8]>>

where Self: Immutable,

Writes a copy of self to dst.

fn write_to_prefix( &self, dst: &mut [u8], ) -> Result<(), SizeError<&Self, &mut [u8]>>

where Self: Immutable,

Writes a copy of self to the prefix of dst.

fn write_to_suffix( &self, dst: &mut [u8], ) -> Result<(), SizeError<&Self, &mut [u8]>>

where Self: Immutable,

Writes a copy of self to the suffix of dst.

impl IntoIterator for F

type Item = F

The type of the elements being iterated over.

type IntoIter = Iter<<F as IntoIterator>::Item>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl KnownLayout for F

where Self: Sized,

type PointerMetadata = ()

The type of metadata stored in a pointer to Self.

impl LowerHex for F

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for F

fn not(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

type Output = F

The resulting type after applying the ! operator.

impl Octal for F

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for F

fn eq(&self, other: &F) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Sub for F

fn sub(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

type Output = F

The resulting type after applying the - operator.

impl SubAssign for F

fn sub_assign(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

impl TryFromBytes for F

where le128: TryFromBytes,

fn try_ref_from_bytes( source: &[u8], ) -> Result<&Self, ConvertError<AlignmentError<&[u8], Self>, SizeError<&[u8], Self>, ValidityError<&[u8], Self>>>

where Self: KnownLayout + Immutable,

Attempts to interpret the given source as a &Self.

fn try_ref_from_prefix( source: &[u8], ) -> Result<(&Self, &[u8]), ConvertError<AlignmentError<&[u8], Self>, SizeError<&[u8], Self>, ValidityError<&[u8], Self>>>

where Self: KnownLayout + Immutable,

Attempts to interpret the prefix of the given source as a &Self.

fn try_ref_from_suffix( source: &[u8], ) -> Result<(&[u8], &Self), ConvertError<AlignmentError<&[u8], Self>, SizeError<&[u8], Self>, ValidityError<&[u8], Self>>>

where Self: KnownLayout + Immutable,

Attempts to interpret the suffix of the given source as a &Self.

fn try_mut_from_bytes( bytes: &mut [u8], ) -> Result<&mut Self, ConvertError<AlignmentError<&mut [u8], Self>, SizeError<&mut [u8], Self>, ValidityError<&mut [u8], Self>>>

where Self: KnownLayout + IntoBytes,

Attempts to interpret the given source as a &mut Self without copying.

fn try_mut_from_prefix( source: &mut [u8], ) -> Result<(&mut Self, &mut [u8]), ConvertError<AlignmentError<&mut [u8], Self>, SizeError<&mut [u8], Self>, ValidityError<&mut [u8], Self>>>

where Self: KnownLayout + IntoBytes,

Attempts to interpret the prefix of the given source as a &mut Self.

fn try_mut_from_suffix( source: &mut [u8], ) -> Result<(&mut [u8], &mut Self), ConvertError<AlignmentError<&mut [u8], Self>, SizeError<&mut [u8], Self>, ValidityError<&mut [u8], Self>>>

where Self: KnownLayout + IntoBytes,

Attempts to interpret the suffix of the given source as a &mut Self.

fn try_read_from_bytes( source: &[u8], ) -> Result<Self, ConvertError<Infallible, SizeError<&[u8], Self>, ValidityError<&[u8], Self>>>

where Self: Sized,

Attempts to read the given source as a Self.

fn try_read_from_prefix( source: &[u8], ) -> Result<(Self, &[u8]), ConvertError<Infallible, SizeError<&[u8], Self>, ValidityError<&[u8], Self>>>

where Self: Sized,

Attempts to read a Self from the prefix of the given source.

fn try_read_from_suffix( source: &[u8], ) -> Result<(&[u8], Self), ConvertError<Infallible, SizeError<&[u8], Self>, ValidityError<&[u8], Self>>>

where Self: Sized,

Attempts to read a Self from the suffix of the given source.

impl UpperHex for F

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for F

impl Eq for F

impl Immutable for F

where le128: Immutable,

impl StructuralPartialEq for F